Vogue 2248 by Alexander McQueen for Givenchy

BMCLabs1

I made the first of my patterns by Alexander McQueen for Givenchy: the cowl-neck sheath dress, Vogue 2248. (See my earlier post here.)

Vogue 2248 by Alexander McQueen for Givenchy (1999) Dress with contrast cowl neck.
Vogue 2248 by Alexander McQueen for Givenchy (1999)

I had planned to make the dress in my default black, and had even bought some mesh for the contrast cowl neck. But when I started looking back over runway photos from Givenchy’s neo-noir Fall 1998 ready-to-wear collection, I was struck by the palette of neutrals, electric blue, and especially the combination of oxblood with red.

Givenchy FW1998 Frankie Rayder and Sunniva Stordahl
Models: Frankie Rayder and Sunniva Stordahl. Images: firstVIEW.
Givenchy FW1998 by Alexander McQueen - runway photos by Thierry Orban
Photos: Thierry Orban. Images: Corbis.

(There’s a blue version of the original sleeveless dress on eBay. The dress fabric is a nylon/acetate/elastane blend, with acetate lining, and the back zipper reaches all the way up through the cowl.)

I made View B, the sleeveless, mid-calf version, in oxblood with a red cowl neck. I hit Designer Fabrics and found some oxblood wool, red mesh for the contrast cowl, and Bemberg for the lining. The pattern recommends chiffon for the contrast, but I wanted to stick with the mesh used for the runway version. I was a little stumped as to interfacing for the contrast, and even bought some tomato red tricot to use before learning that the best interfacing for mesh is more mesh.

I wanted a close fit, so I ignored the sizing and went by the finished garment measurements printed on the pattern, including 1″ ease at bust and waist and a little more in the hips. I also lengthened the skirt by 1.5″ to achieve the correct length.

Technical drawing for Vogue 2248
Technical drawing for Vogue 2248

This was my first dart-fitted dress, and I had fun sewing my very first contour darts—eventually realizing the virtues of even a makeshift tailor’s ham. The cowl neck is cut on the bias, but this didn’t pose any problems, since the mesh handles much better than chiffon.

With the full lining and absolutely no stretch, the dress feels very old-fashioned to wear. One thing I misjudged was the bodice/cowl part of the bodice—I cut the right size in the bust, but didn’t distribute the extra waist length I was adding between the above-waist and shoulder areas, so it’s a bit on the high side and the cowl neck has a closer fit than in the runway photo. It would have been simpler to cut a size up and take the bodice in at the sides. The “interfaced” mesh is also a little bulky; the extra layer was probably unnecessary.

Since the Fall 1998 collection was inspired by Blade Runner, it seemed appropriate to take photos of the dress at the David Cronenberg: Evolution exhibition at TIFF Bell Lightbox. In the Interzone area, devoted to Naked Lunch (1991), visitors could have their photo taken with a Mugwump:

With the Mugwump at TIFF's David Cronenberg: Evolution

Naomi took some photos of me upstairs at an extension of the Cronenberg show called Body/Mind/Change (BMC). Visitors to the biotech facility BMC Labs can observe the production of personalized POD (Personal On-Demand) implants, which are held awaiting pickup by their hosts. The BMC Labs facility is still open if you’d like to create your own POD implant:

Pod Wants to Know You.
Image: BMC Labs.

Here I am in the POD holding area:

BMCLabs2

A closer view of the mesh cowl neck:

BMCLabs3

BMCLabs4

The cowl fastens in the back with hooks and thread eyes:

BMCLabs5

The lab staff let me hold a brand-new red POD (rara avis—most are colourless):

BMCLabs6

We were delighted to find BMC Labs at the end of our visit: it was the perfect backdrop for the dress given McQueen’s futuristic, sci-fi inspiration for his collection for Givenchy. I’m crossing my fingers for a red POD of my own…

Twenties Swimsuit – Simplicity 7041 (VFL 145)

Simplicity 7041
Simplicity 7041 (ca. 1929) Image via the Vintage Patterns Wiki.

I love vintage swimwear. (See my post on vintage beachwear patterns here.) It’s also been years since I had a bathing suit; somehow I can never make myself shop for one. So I resolved to make a vintage swimsuit using the Vintage Fashion Library’s reproduction of Simplicity 7041, VFL 145.

Based on the envelope design and that of the consecutively numbered Simplicity 7042, a lingerie set with bloomers, I would date the pattern to circa 1929. (On the development of the 1920s swimsuit see Bomber Girl’s post here.)

These two George Hoyningen-Huene photos of Patou swimsuits from the late ’20s served as reference and inspiration for me:

Wool swimsuit by Jean Patou, ca. 1928. Photo: George Hoyningen-Huene.
Wool swimsuit by Jean Patou, ca. 1928. Photo: George Hoyningen-Huene. Image via Corbis.
Model in Jean Patou swimsuit. Photo: George Hoyningen-Huene.
Model in Jean Patou swimsuit, ca. 1929. Photo: George Hoyningen-Huene. Image via Corbis.

The original pattern instructions give a charming description: “7041: Style for chic and for good swimming. It has a smart belted waistline, buttoned shoulder straps, and a round neckline. Style 1: A one-piece suit for the very active swimmer who demands plenty of freedom. Style 2: A two-piece suit which looks well on the taller woman. With deep V-back.” The pointed, lapped lower bodice seam is a nice Deco detail, which could be brought out further by making the attached shorts in a contrasting fabric.

I made the one-piece with scoop back. I found some lightly textured, black swimwear fabric on sale at King Textiles’ old location, with matching white fabric for a contrast belt. To face the upper bodice and belt I used tricot interfacing/lining from Designer Fabrics, where I also got some plain 1″ buttons. The 1.5″ belt buckle is from Leather & Sewing Supply Depot (now at 204 Spadina).

I needed to grade down the repro’s B38 to fit me. Even then I had to take in the suit at the upper side seams. The straps were made slightly shorter and narrower as part of the grading, but the length of the shorts was unaltered. I added white topstitching along the top and bottom edges of the bodice, with contrasting black topstitching on the white belt.

The cut of the shorts is in the old style, which takes some getting used to. Here is a view of the suit, shown flat:

1920s Simplicity swimsuit
Simplicity 7041 swimsuit (ca. 1929) – Vintage Fashion Library 145.

Naomi and I took some photos of the swimsuit at the old Sunnyside Bathing Pavilion. This archival photo shows the pavilion in its heyday:

1920s aerial photograph of bathers at Sunnyside Bathing Pavilion, Toronto.
Sunnyside Bathing Pavilion, ca. 1924. Image via City of Toronto Archives.
The pavilion’s grand, Beaux-Arts archway records the year it opened to the public, 1922:

Sunnyside Pavilion
The grand archway at Sunnyside Bathing Pavilion.

As Naomi pointed out, the suit is basically a playsuit, and with heels and a coverup it didn’t feel too odd walking down Queen Street West to the beach.

Suit with coverup
Simplicity 7041 worn with a coverup (shoes: John Fluevog).

I was able to cheat and make the buttons non-functional:

Suit / gates
Simplicity 7041 with “buttoned” straps.
Suit with parasol
Simplicity 7041 – front view

Suit steps

I had trouble deciding how to fit the suit. Although period photographs show knit swimsuits that cling to the body, the illustration shows a looser-fitting suit. Since I wanted to swim in it, I wasn’t aiming for an authentic reproduction. (Wool is just not an option.) But having made it up, it’s clear the suit would drape better in a lighter swimwear fabric. I may try the low-backed, skirted view for next summer…

Parasol

(Cross-posted to We Sew Retro.)